|
Manfrotto 488RC4 Midi Ball Head with RC4 Rapid Connect System (3271) | 
| Brand: Bogen
Category: Photography
List Price: $128.00
Buy New: $115.00
You Save: $13.00 (10%)
Rating:  17 reviews
Media: Electronics
Maximum Weight Recommendation (lbs): 17.4
Shipping Weight (lbs): 3
Dimensions (in): 7 x 4 x 4
MPN: 488RC4
Model: 488RC4
UPC: 719821197898
EAN: 0719821197898
ASIN: B00009R6N3
Release Date: April 14, 2006
Shipping: Eligible for Super Saver Shipping
Availability: Usually ships in 24 hours
| |
| Features:
| • | Ideal for all medium format, 35mm and digital cameras | | • | Solid aluminum construction and phenolic resin ball | | • | 3271 quick-release camera plate with a secondary safety catch; two spirit levels for precise leveling on both vertical or horizontal axis | | • | Separate fast-action ratchet lever for 360-degree pan | | • | Easy to grip locking knob for +90 to -90-degree tilt movements |
|
| Editorial Reviews:
Product Description
Same as the 488 but equipped with a 410PL quick-release camera plate with a secondary safety catch and two spirit levels for precise leveling on either vertical or horizontal axis. The new 488RCO features a separate fast action ratchet lever for 360? pan and an easy to grip locking knob for +90?-90? tilt movements.
|
| Customer Reviews: Read 12 more reviews...
 Sturdy but HEAVY September 26, 2008
J. Huang (New Haven, CT USA)
1 out of 1 found this review helpful
After researching ball heads, I landed on this over the 486RC2 (no separate panorama) and the 488RC2 (no spirit level). It feels very sturdy while supporting my Canon Rebel XSi with the kit lens. It's not a monster setup as compared to some of the other reviews, but it had no problem with sagging even with the knob only half-tightened. As a corollary, it was a lot heavier than I expected and I'd agree with previous reviewers that it may not be the best item for backpacking. Day hikes may be do-able (I'm going to try next month). The plate is deeper than my XSi, but it doesn't look obtrusive when off the head and it's not in the way when I'm focusing or zooming. The XSi battery compartment is not obstructed by the plate. The quick release lever was a little stiff in the beginning, but feels solid. I did not have any problems manipulating the safety button as other reviewers have griped. The head is taller than I expected, so be aware that you need to add about 4.5 inches to the tripod height for the true camera height. Luckily I'm 6 foot, so this head on top of the Manfrotto 055XPROB legs fully extended and center column down is just the right height for me.
Big, heavy, but tough. September 17, 2008
R. Bellamy
The reasons I like this unit are the same reasons I don't. It's larger than expected, but it's robust. I like the ball head for use on my Manfrotto MagFiber monopod. In fact, I like it so much that I plan to by a video tripod that can use this head.
I mount a Canon 5D with an L series IS 100-400mm lens on it and it locks securely without ever giving me the feeling that it might slip or break. It's easy to learn how to use it even when you're "in the heat of battle" as I was an air show last weekend.
I would buy it again, even if it does double the weight of the monopod it's mounted atop.
 Simply Excellent! September 11, 2008
R. Folkerts (Tucson, Arizona)
Quality product. I have been a fan of the "Walmart" variety tripods until now. This head is bigger than I expected and not in a bad way. You get what you pay for. Tight and solid where it needs to be yet easy to adjust. I could not be happier.
Perfect match for 055XProB legs August 5, 2008
Richard D. Silvius Jr.
3 out of 3 found this review helpful
I researched the heck out of ballheads before settling on this one.
I almost bought the 486RC2, but the more reviews I read, the more I heard about slippage problems with many DSLRS. Also, it lacks a separate panning control which SUCKS.
I also looked at a lot of Slik Products, but couldn't really find what I was looking for. Either they weren't heavy duty enough or they were too much overkill. I think their round rapid connect plates are pretty cool though!
I have owned the 488RC4 for a little over a month now, and have used it in all sorts of situations. I have not been disappointed. Specifically, here is why I like it so much:
-I am using a Canon 40D with battery grip pretty much always attached, and a variety of lenses. NO SLIPPAGE, not even in the vertical position, and that's hugely important (especially if you do a lot of portraits, or sports shooting)
-There is a separate control for panning. This is just critical--I just can't see anyone not needed to pan at some point, and if you went with the 486, you're going to mess up your whole camera position by loosening your tension knob and trying to pan. You'll never get a decent pano. Do yourselves a favor, and get one with a pan control. On this particular ballhead there are degree markings, and the action is silky smooth. Also, you can pull out and twist the lever to reposition it for extra leverage. Nice thought, Bogen!
-The RC4 features two bubbles levels, one for horizontal and one for vertical. Very nice.
-The Rapid Connect plate itself is super easy. You just plunk it down and it locks in place. It's very easy to take off with the lever. I leave the plate permanently attached to my camera. You may also consider purchasing additional plates if you have heavy lenses with tripod collars.
This ballhead and RC combo is rated for over 17 lbs. More than enough for most equipment. It's a little on the heavy side because of this--but it's par for the course for a 17 lb duty rating.
I highly recommend this product--ESPECIALLY for use with the 055ProB legs. They're made for each other!!
|
|
|
| |
